"Updated specifications"

Updated specifications

test specification

Table test specification
symbol	description	value	units
$A_{t}$	Send-receive voltage transfer at test frequency	$- 53.7$	$dB$
$C_{i R T}$	Test receiver input capacitance	$2.2 \cdot 10^{- 10}$	$F$
$R_{i R T}$	Test receiver input impedance	$1.0 \cdot 10^{6}$	$Ω$
$f_{m}$	Test measurement frequency	$1000$	$Hz$

interface specification

Table interface specification
symbol	description	value	units
$C_{r}$	Receive coil capacitance	$2.533 \cdot 10^{- 11}$	$F$
$C_{s}$	Send coil capacitance	$1.091 \cdot 10^{- 10}$	$F$
$L_{r}$	Receive coil inductance	$0.1$	$H$
$L_{s}$	Send coil inductance	$0.000314$	$H$
$R_{r}$	Receive coil resistance	$235$	$Ω$
$R_{s}$	Send coil resistance	$8.1$	$Ω$
$k_{c}$	Send-receive coil coupling factor	$0.000489$

functional specification

Table functional specification
symbol	description	value	units
$R_{ℓ}$	Receiver load resistance	$2000$	$Ω$
$V_{i}$	Transmitter peak input voltage	$1$	$V$
$V_{o}$	Receiver peak output voltage at maximum input voltage	$0.25$	$V$
$Z_{i}$	Transmitter input impedance	$1.0 \cdot 10^{4}$	$Ω$
$f_{f p l}$	Maximum frequency for full-power	$5000$	$Hz$
$f_{m a x}$	Small-signal -3dB low-pass cut-off frequency	$1.5 \cdot 10^{4}$	$Hz$
$f_{m i n}$	Small-signal -3dB high-pass cut-off frequency	$60$	$Hz$
$v_{o n}$	Zero-signal RMS output noise over -3dB frequency range	$0.0001$	$V$

power supply specification

Table power supply specification
symbol	description	value	units
$V_{N}$	Negative supply voltage	$- 15$	$V$
$V_{P}$	Positive supply voltage	$15$	$V$

Go to Coupled-Coils-Simple_index

SLiCAP: Symbolic Linear Circuit Analysis Program, Version 1.6.0 © 2009-2024 SLiCAP development team

For documentation, examples, support, updates and courses please visit: analog-electronics.tudelft.nl

Last project update: 2024-03-04 22:13:23